Recent content by 5L33P3R

Thank you guys for the info! Hopefully I can get this fixed now that I have atleast some direction to go in. -Len

Yeah, it sets off the SES light every time the engine is started. Problem is nobody I know has a TR to swap parts with. I read somewhere that a newer ignition mod could be substituted do you know if this is true? -Len Also, just to be sure, I was testing the right wires correct? There was...

Hey everybody, haven't posted here in a while since I only drive this brick in the summer. Any way, today I was trying to fix a cam sensor code and have been unsuccessful. What I have done is tried adjusting the cam in one direction to the other with no success. Next I installed a new cap - did...

1g4gk4778gp432111 oops, that oughta do it. sorry for the mess up. thanks again.

1g4k4778gp432111 Thanks in advance!

i'm in, thanks

*fingers crossed*

Thanks for all the info/links. I did reset the ecu and the same code comes right back up after about ten seconds. as for the parts actually being on the car..I also recieved a gigantic box of all the stock parts that were on the car beforehand. Oh, and about the long winters, your right about...

code 41 i belive. I had two codes when i purchased the car one was for TPS and I got that taken care of. the other was for cam sensor. is there any way to test if the ecm is getting the correct signal? i'm pretty handy with a DVOHM i just dont know in what order/wires to test. does the signal go...

Well after searching through all the paper work that I was given with the '86GN I found a parts list of some of the stuff thats on the motor. most of it is kb part numbers but I would like to know exactly what I'm working with so I can get that TT chip coming. Heres a list of what I have found...

Guess i'll try some10-40 in there and see if that works out or not. Thanks for the help. -len

I think you are refering to the cam gears statement? if so i think your right. however, i think i was kind of poking fun at my self as well since my old ride was a CRX...i think:p -think

Yeah, it does have an aftermarket oil pressure gauge on the car. is it faulty? i don't think so but could be. thing is the oil idiot light on the dash does still work and blinks on almost every time i come to a stop after the oil is up to temp. There are 5000 miles on the rebuilt engine. iv...

Well lets see, I jumped into this world of turbo buicks recently and have a few issues. I will start with the low oil pressure. WhenI start the car it has 80+ PSI but after driving and engine temp is upto 160deg oil pressure gets down to ~8 PSI at idle. Is this even close to "ok"? I would think...

Yeah, it's for Sleeper. got em on the perminate plates- $208 including lifetime personalized and I never have to pay taxes on this car again! (good thing too as I can see some lunch money being spent in the process) -len