My New Setup...
Front 15x8 gbody aluminum rims, 4" backspace, wearing Hankook VH101 265/50R15.
Rear 15x10 gbody aluminum rims, 4 1/2" backspace, wearing MT ET Street SS 295/55R15.
Tested on the street.
Fronts clear fine. Just barely kiss the lower inside rear side fender liner on full inward lock. Not an issue to me as I'm never at full lock.
Rears: Plenty of clearance on this inside. Driver side rear rubs ever so slightly on the fender lip on the underside center only on very hard dips because I've measured that the driver rear sits 1/4" lower than the passenger side rear of my car. Will address this week with a fender lip roll.
Suspension and bracing is all newer Bilsteins, Kirban Springs, HR Sway and HR Arms, GNX Brace and more bracing to come.
Overall, I am very happy. Looks wide and mean to me. I may add a spacer to the front to kick the front tires outward even more. I also have a complete set of ready-to-bolt-on GNX fender flares but if I add them and still want to keep the wide stance, I'll need 1" wheel adapters on all 4 corners to keep the wide and filled-out look. I'm doubting I will use the GNX flares.
Enjoy the pix. Embarrassed but the car has not been washed or detailed yet for the Spring.