DiverDavies
Diver Davies
- Joined
- Sep 10, 2008
My mechanic told me a 4l80e is a 400 with overdrive . Can i put a stand alone controler and the 4l80e in my buick.. Will the motor bolt to the trans? What other problems will come up... Just a thought..
How does it work? How much clearancing? Is it worth it? Thanks a lot..Yes,
You can install a 4L80E.
You'll need an adapter plate fro BOP-Chevy
proper converter
standalone controller or full manual operation
crossmember mods or custom crossmember
shorten the driveline
some floorpan clearancing on a G-body.
I am using a 4l80e + bigstuff3 . Works great. 274 cdi 47/88 turbo.
Yes,
You can install a 4L80E.
You'll need an adapter plate fro BOP-Chevy
proper converter
standalone controller or full manual operation
crossmember mods or custom crossmember
shorten the driveline
some floorpan clearancing on a G-body.
BIG STUFF3 RUNS ENGINE AND TRANS. I LIKED THAT ALL IN 1 PCM . WHAT ENGINE EFI SYSTEM ARE YOU USING? TRANS - I OWN A REPAIR SHOP SO I BUILT THE TRANS. I USED HE CLUTCHES, REGULAR STEELS , HD SPRAGS , AFTERMARKET IN PUT SHAFT , CONVERTER- 9 1/2 REAR COVER 12 INCH 3 LOCK-UP DISK FT ,SALL 4000-4500 ,TRANSGO SHIFT KIT . I COULD TAKE SOME PICTURES OF THE CONVERTER . ENGINE AND TRANS IS OUT OF THE CAR DAN AT DLS HAS MY ENGINE. DRIVE SHAFT I USED A THICK WALL TUBE , HD PINION YOKE AND HD U JOINTS. COSSMEMBER SUMMIT HAS ONE I THINK FOR G BODYS WILL HAVE TO CUT TO ALLOW CLEARANCE FOR TURBO EXHAUST . CLEARANCE I ONLEY HAD TO CUT OFF THE EAR ON DIRVERSIDE OF TRANS. IF I CAN HALP I WILL.With big stuff3 did you still have to buy anything from TCI? What gen is your BS3?
TIA
Prasad
Hey Jake how is that Trans brake kit for 4l80e coming along?
Thanks
Prasad
How does it work? How much clearancing? Is it worth it? Thanks a lot..