Search results

I have an AC line I purchased in 2011/2012 from Highway Stars Buick. Before the Buick was stolen. As you can imagine I have no use for the line now, $100 it's yours. I prefer a local pick up. If you want it shipped you cover all shipping cost and fees.

I have a Power Master brake system I pulled off my T_Type in 2006. The unit was working but I pulled it for a reason, which I don't recall. I am certain it needs a rebuild. $50 and I prefer a local pick up. If you want me to ship it you cover cost of shipping and any fees.

I have a wing for an 87 GN. $50, local pick up only It's a little banged up but nothing a good sanding won't repair.

I've got a long block I took out of the 87 t_type I used to own. The old boy through a rod and I can't recall which cylinder sustained the damage but it's low enough into the bore that I don't feel it will cause a problem for a mild street engine build. Come and pick it up and it's yours for...

I've got three double roller billet timing sets, two of which I know haven't ever been run. The .002 and .004 over were only used for mock up purposes. I am pretty sure the standard hasn't been run but not 100%, I believe I used it for mock up only. Price on standard = $75 plus shipping ...

I have a block that was prepped by Weber with Weber Billet Mains. I ran this block for a year before converting to the 4.1 liter, only street duty. For local pick up only. I am not shipping. The zip is 75201 Dallas Texas. The price is $300

My loss is your gain. I have a 9.5" PTC converter that was never installed. The part number is ptc95-700-27-17-0-sl-sbp and I have been told this will work nicely with a 62 to 70mm depending on the RPM range. The best way to determine if this will work with your application is to call PTC...

Menace most recently came to an untimely end. As a result Ihave some parts that were never run up for sale. As the add title says. Eaton 30 spline part non 19559-010 along with a set of 30 spline Moser axles. Complete package 600. Does not include shipping nor does it include fees.

Last night 3/31/12 my 87 WE4 was stolen. vin:1G4GJ1178HP429835 The car was very unique in the fact that is has the G5 swap on it. Additionally it has a dry sump oil system from Johnson and Stef's custom aluminum oil pan. These are just some of the attributes that make it unique. If...

I've been trolling the old supra boards, but I am honestly coming to realize the knowledge level just isn't there. Anywho I decided to have a look at the internals of my supra tranny and found the following. The face of the torque converter has witness marks where the bolts from the flex...

$275 plus shipping plus paypal fees I have a brand new 40mm tial wastegate I had planned to use in a set up on another car. I opted to go just a tad larger and use a gate with v-band clamps. Color is silver and the spring is .5 bar. Thanks for your interest.

To calculate converter slippage using the following formula: Conv Slip% = [((RPM * Tire Height) / (Rearend Ratio * Trans Ratio * MPH * 336)) -1] * 100 Do I use the the tranny gear ratio the car is in for the MPH and rpm I am using? For example I am at 6150rpm 1st gear 39 mph do i use...

I have been fighting this buick since I have owned it. All under the veil of an education! I finally think I am getting somewhere. Even though I have yet to ride in a TR that runs well, for comparison basis. I think when you know you know. My most recent issue involved not being able to...

I am looking for a .81 turbine housing for my old style p-trim turbo. It isn't the f1-series with the nut that extends beyond the turbine housing.

I have a dry sump system on my Buick and the vent on the oil tank releases steam. Admittedly when first building this combination I had some problems with the heads and cracks and leaking. Those were fixed and the heads pressure tested fine. Now I just get a steady stream of steam, but...

What exactly does it mean to blow through the converter? I was doing some wide open pulls last night and the car is shifting hard from 1st to 2nd to 3rd but in 2nd gear it almost feels like a manual car when the clutch fails and slips. Not a tranny guy, but I figure I need to check...

Still trying to shake the lazy buick down and I was running some WOT pulls last night and my log goes from 23.56 seconds to 28.11 seconds. MPH jumped from 40 some miles per hour to 80 miles per hour. The information in between is not on the log, can anyone help me decipher what this means...

This would be considered a performance ECM correct. Can someone give me an idea of how the AMS1000 unit works. I was flipping through the manual online and having a hard time. Is the AMS a closed loop system, from my reading I see where they talk about target boost and this being...

Just wanted to document my hydro - boost install pictures as well as a few pieces of information that some may find useful when doing there own. 10mm socket needed to bleed front brakes 5/16" deep socket with 1/4" drive when bleeding the rear you obviously can't use the socket to turn the...

For those of you looking for hose options when upgrading to the Aeroquip braided stainless hose with a rubber lining I thought this might be helpful. I talked with the performance division @ 888-258-0222 ext #4 and I was told the AQP hose is good with E85 up to 100 degree F and for short...