Hi I have a zo6 sensor I wanted to use its mounted inside a 4" maf pipe and I am using a gen 2 translator .
when I select the ls1/ls6 85mm maf on the gen 2 I try to start the car but it does not start everything plugs in without issues. I have an lt1 maf at the moment and that works fine when I put that back on(and select it in the translator) my main question is what else would be needed to use the z06 maf sensor and what would be the best way to test if it is bad thanks any input would help
when I select the ls1/ls6 85mm maf on the gen 2 I try to start the car but it does not start everything plugs in without issues. I have an lt1 maf at the moment and that works fine when I put that back on(and select it in the translator) my main question is what else would be needed to use the z06 maf sensor and what would be the best way to test if it is bad thanks any input would help