Will these frame mounts work

[mcolor]

I'm removing my 3.8 carb out my 86 regal and going with a 350 will the frame mounts work are do I need a different set.

Posted from the TurboBuick.Com mobile app

 

[chopped39]

The mounts are different

 

[mcolor]

The mounts are different

Can you post a link to correct ones thanx

Posted from the TurboBuick.Com mobile app

 

[chopped39]

The problem is your going to need the mounts for the engine side. the rubber mounts on the chevy engine are on the frame and the steel mounting is on the engine. The frame mounts are available at napa 6021179 is the part number for those. Might be better off getting solid mount kit from Jegs or Summit. Good Luck

 

[earlbrown]

Unless you mean Buick 350....

 

[mcolor]

Unless you mean Buick 350....

No Monte Carlo 350

Sent from my SPH-L710 using TurboBuick Mobile mobile app

 

[earlbrown]

In that case use the mounts out of the monte carslow.

 

[mcolor]

In that case use the mounts out of the monte carslow.

Don't have a donor car but I did look up the mounts and found a new pair thanx for the help lol monte carslow

Posted from the TurboBuick.Com mobile app

 

[TRICKSIXPA]

Use the mounts if you have a donor car. If not they have a bunch you can buy from Jegs or Summit that will work. Also the pads have to be moved up toward the front of the car. GM pad only use three of the holes on the g body frame.