Im just a little confused on what to do with the 1-2 accum. and the 3-4 accum.
I would guess the best is as instructed in the CK book.
But just want to check to make sure.
For the 1-2 I will block it with check ball and leave out the spring and piston. Correct. Dont use the stiffer spring.
For the 3-4
Transgo kit says use two springs on top on each side of the piston.
CK says use updated piston with different single spring on top?? Is this right because the layout shows the the spring is under the piston??
Also I would assume the piston that came in the transgo kit is the updated one, so I could just get the spring from CK correct?
Thanks guys!!
I would guess the best is as instructed in the CK book.
But just want to check to make sure.
For the 1-2 I will block it with check ball and leave out the spring and piston. Correct. Dont use the stiffer spring.
For the 3-4
Transgo kit says use two springs on top on each side of the piston.
CK says use updated piston with different single spring on top?? Is this right because the layout shows the the spring is under the piston??
Also I would assume the piston that came in the transgo kit is the updated one, so I could just get the spring from CK correct?
Thanks guys!!