What size is this turbo??
- Thread starter 1BAD_GN
- Start date
1BAD_GN
1BAD_GN
- Joined
- Nov 28, 2012
Thanks Bison. What size stall would u recommend and what is the hp rating on this turbo?
Posted from the TurboBuick.Com mobile app
Id have to know what turbine it had to make any rec. we don't know for sure it's a gt35r. Gt35r has a 61.4mm inducer. The turbine would be 62mm exducer if gt35r. If it's a t3/t4 bearing housing it's probably a t350 turbine aka stage 5. The GT35r is capable of mid 10's with supporting parts all in. It takes a quality converter to couple mid 10 sec power. Not necessarily a given stall.
Gt35r compressor 61-62lbs/min 2.5:1 PR:
This compressor is a winner on a cam/head 3.8 v6 at 20-25psi big time. With a good set of heads and good low pressure drop intercooler this turbo will go mid 10's no problem. Either t350 turbine, t04 69, or t04 76 (p trim) will kick ass with it.
This compressor is a winner on a cam/head 3.8 v6 at 20-25psi big time. With a good set of heads and good low pressure drop intercooler this turbo will go mid 10's no problem. Either t350 turbine, t04 69, or t04 76 (p trim) will kick ass with it.
1BAD_GN
1BAD_GN
- Joined
- Nov 28, 2012
Got turbo installed but the hose on the bottom that runs back to the block doesn't line up. Seems as if the turbo needs to rotate for it to line up.Gt35r compressor 61-62lbs/min 2.5:1 PR:
This compressor is a winner on a cam/head 3.8 v6 at 20-25psi big time. With a good set of heads and good low pressure drop intercooler this turbo will go mid 10's no problem. Either t350 turbine, t04 69, or t04 76 (p trim) will kick ass with it.
Posted from the TurboBuick.Com mobile app
Nascar83Fan
Active Member
- Joined
- Jul 2, 2010
Any way that you can post pics so we can see what you're seeing?
1BAD_GN
1BAD_GN
- Joined
- Nov 28, 2012
Attachments
1BAD_GN
1BAD_GN
- Joined
- Nov 28, 2012
Loosen the 4 small bolts or the bigger bolts. I lossen the other side but that only rotated the inlet bell.
Posted from the TurboBuick.Com mobile app
