The new owner did very minimal work, just 264 HKS cams, 64/66 precision DBB 81 AR, E85, pro EFI stand alone computer, single 3 inch exhaust, cash iron shorty header, stock TB, stock intake.
First video is 35psi, second video he disconnected wastegate to keep it shut and was going all out but a hose that lead to the blow off valve behind the right fender blew off you can see the hose that is going into the fender come off at the 1.15sec mark in the second video so the run had to be aborted, even then it put down 847rwhp and 796 torque with the power curve still going up when the run was aborted, I am almost sure he would off put down over 900 wheel if it wasn't for the damn hose blowing off, pretty damn impressive for NO head work whatsoever, and stock valve springs..
, btw compression is 9 to 1 with eagle rods, all ARP bolts and stock bottom end.
Enjoy videos..
http://s207.beta.photobucket.com/user/matanovich/media/Franksupra1.mp4.html
http://s207.beta.photobucket.com/user/matanovich/media/Franksupra2-1.mp4.html
First video is 35psi, second video he disconnected wastegate to keep it shut and was going all out but a hose that lead to the blow off valve behind the right fender blew off you can see the hose that is going into the fender come off at the 1.15sec mark in the second video so the run had to be aborted, even then it put down 847rwhp and 796 torque with the power curve still going up when the run was aborted, I am almost sure he would off put down over 900 wheel if it wasn't for the damn hose blowing off, pretty damn impressive for NO head work whatsoever, and stock valve springs..
, btw compression is 9 to 1 with eagle rods, all ARP bolts and stock bottom end. Enjoy videos..
http://s207.beta.photobucket.com/user/matanovich/media/Franksupra1.mp4.html
http://s207.beta.photobucket.com/user/matanovich/media/Franksupra2-1.mp4.html
