TE63-1/Stock location I/C

[ST. RACE]

Any one have a 63-1 with stock location I/C. Stock I/C does not fit very well,had too un bolt and move an inch or so forward( just going to use stockI/C tell I get things going ). I/C neck fit a inch or so into turbo, still not even with i/c forward was it even. Can make bracket to hold it in place.
Does any one make a bigger stock location i/c for this turbo/if so how does it fit.
thanks ror any help.

 

[Gamble]

I have a TE-63 and stock local int. and it fit great until I had to take the motor out after killing the crank, on the way to the track, for it's first pass down the track !! But I have no dought it will go back in with no prob.

 

[NastyGn]

I had a 63-1 with a stretched stock IC and had the bigger neck put on it. It fit good, I did have to make a 1" longer spacer with holes on each end to move the IC forward that I attached on the drivers side.

The car did run a best of 10.74 with this unit.

Good Luck