With a .63 AR exhaust housing it should work well. Or you could go with the slightly larger TE61, which is what I just put on and it rocks on the street with my 2700 stall convertor, almost as fast as the stocker on spoolup and I can build 10-12# boost with just the brakes, although at the track its hard to get a full 12# before the lights green, 10# is about right when the light turns. Boost comes on quick and spins the ET Streets at about 20mph at only 10-15 ft into the run, best 60' was 1.74. Also depends what type of exhaust wheel is on the other side of the T61 compressor. I've got an experimental T3-31 that I think works awesome, but I haven't had any direct experience with the others, besides the GT35 and that one did not work with a T60 compressor side..