Stock stroke or go to a stroker kit?

[toomanymodz]

Are you running a steel crank or a cast crank?

Sent from my SPH-L720 using TurboBuick Mobile mobile app

Steel crank.

And to qws2000, you're right. These cars are hungry hungry hippos.

 

[qws2000]

me too

 

[87WE4BOOSTED]

Since you've come this far don't stop..Stroke it...The cost to do it and the cubes you gain only makes since. My setup is very close to Toomanymods... Stroker w/ 6265dbb & PTC 9.5 n/l converter & built trans = killer combo.

Posted from the TurboBuick.Com mobile app

 

[87WE4BOOSTED]

Of course, all supporting mods required! ...lol

Posted from the TurboBuick.Com mobile app

 

[charlief1]

Since you've come this far don't stop..Stroke it...

You really need to watch what you post.

 

[fastestv6injaxs]

You really need to watch what you post.

Roflmao

Sent from my SPH-L720 using TurboBuick Mobile mobile app

 

[fastestv6injaxs]

Since you've come this far don't stop..Stroke it...The cost to do it and the cubes you gain only makes since. My setup is very close to Toomanymods... Stroker w/ 6265dbb & PTC 9.5 n/l converter & built trans = killer combo.

Posted from the TurboBuick.Com mobile app

I think thats what im gonna do.

Sent from my SPH-L720 using TurboBuick Mobile mobile app

 

[87WE4BOOSTED]

You really need to watch what you post.

Lol...After re-reading it, it could be taken the wrong way. My bad!

Posted from the TurboBuick.Com mobile app

 

[charlief1]

Lol...After re-reading it, it could be taken the wrong way. My bad!

At least at the end you didn't add, "it's not that hard.". LOL