L lieu910 New Member Joined Dec 19, 2004 Jul 21, 2005 #1 Whats's the stall speed on a stock GN convereter????
tminer Not quite normal Joined May 25, 2001 Jul 21, 2005 #2 According to Scott Simpson it is ~ 2200 rpm. Tom
T TurboBob Resident mad scientist Staff member Joined May 24, 2001 Jul 21, 2005 #3 my testing has shown abot 2000 at 0 psi boost, and about 2400 at 5 psi. On a turbo car you CANNOT spec stall speed without specing(or assuming) boost psi. Bob
my testing has shown abot 2000 at 0 psi boost, and about 2400 at 5 psi. On a turbo car you CANNOT spec stall speed without specing(or assuming) boost psi. Bob
G GNeric Senior member Joined Jul 26, 2003 Jul 21, 2005 #4 GM rates the "A" code at 2025 and the "B" code at 1996...ex: CA9F would be a 2025 stall and a CB9F would be the 1996 In the last 17 years, I have only seen 2 "A" code converters and the rest have been "B" codes. This is all at 0 boost.
GM rates the "A" code at 2025 and the "B" code at 1996...ex: CA9F would be a 2025 stall and a CB9F would be the 1996 In the last 17 years, I have only seen 2 "A" code converters and the rest have been "B" codes. This is all at 0 boost.
K KEVINS Post count: 24,375 Joined May 24, 2001 Jul 21, 2005 #5 TurboBob said: ...and about 2400 at 5 psi. Click to expand... Yep, I agree.. According to DS mine flashes to 4200 when launching at 16psi tho KS
TurboBob said: ...and about 2400 at 5 psi. Click to expand... Yep, I agree.. According to DS mine flashes to 4200 when launching at 16psi tho KS
