SMC alcohol kit
- Thread starter huntsg
- Start date
TurboJoe3.8
Senior Member
- Joined
- Feb 19, 2003
Check your email 
TurboJoe3.8
Senior Member
- Joined
- Feb 19, 2003
Check your mail :smile:
Could i get those too Kellen.bossert@gmail.com ive been looking everywhere for those.
Thanks,
Kellen
Thanks,
Kellen
huntsg
Active Member
- Joined
- Aug 10, 2009
Does anyone know if there is a parts list too? I’m trying to replace the elbow assembly, nozzle and washer (those that came with this kit are already installed in a stock up pipe with JB weld and I’d like to install them in my 3” pipe) that go into the up-pipe and need to know what size/type they are. Thanks.
Evans Ward
Love those LC2/ Y56 cars!
- Joined
- May 24, 2001
Round bottle, 1st ed kit instructions attached.
huntsg- if memory serves me correct, one M15 nozzle is used which can be sourced from McMaster- Carr. Follow instructions attached for assembly.
huntsg- if memory serves me correct, one M15 nozzle is used which can be sourced from McMaster- Carr. Follow instructions attached for assembly.
Just a Six??
OK! Who Farted??
- Joined
- Jul 4, 2003
Julio/Razor has all the nozzles etc you need. Just check his e-bay listing or PM or Call him. He just sent me a spare LED for something & he is VERY FAIR with prices!!
Evans Ward
Love those LC2/ Y56 cars!
- Joined
- May 24, 2001
Yes, try Razor first as he's one of us!! :wink:
GNTtypeKid
Whooshhhh..Tuuuuuutuuuuutuutuututu
- Joined
- Oct 29, 2009
Alky pump gasket replacment
is it possible to make a gasket for our alkycontrol pumps to stop a leak..my car goes through a lot of alky because it leaks most of it out of the pump. can neone help me out? thanks.
is it possible to make a gasket for our alkycontrol pumps to stop a leak..my car goes through a lot of alky because it leaks most of it out of the pump. can neone help me out? thanks.
salvageV6
Daily Driver
- Joined
- May 25, 2001
Standard Full Cone
1/8" 6.32 10.00 22.36 0.03" 7/16" 1 1/8" 3178K76 4.46
3178K86 7.93
3178K46 5.49
1/8" 9.49 15.00 33.54 0.04" 7/16" 1 1/8" 3178K77 4.46
3178K87 7.93
3178K47 5.49
Here's some McMaster Carr info. you want standard full cone 1/8" NPT in whatever finish you like they have stainless steel ones too.
M10 and M15 sizes. GPH at 100psi. rated.
If you have to replace your pump every two years you've bought the wrong kit or are using the wrong alky.
1/8" 6.32 10.00 22.36 0.03" 7/16" 1 1/8" 3178K76 4.46
3178K86 7.93
3178K46 5.49
1/8" 9.49 15.00 33.54 0.04" 7/16" 1 1/8" 3178K77 4.46
3178K87 7.93
3178K47 5.49
Here's some McMaster Carr info. you want standard full cone 1/8" NPT in whatever finish you like they have stainless steel ones too.
M10 and M15 sizes. GPH at 100psi. rated.
If you have to replace your pump every two years you've bought the wrong kit or are using the wrong alky.
