Well it started last year I have a full billit tranny built by Janis with all Ck performance parts. My servo always leaked bad and for only a few hundred miles on it the tranny started to get a soft shift. No flare just a weak bump. Went to the track and before the first to second shift it just bangs back and forth and won't shift unless I let off. Well I took my ck servo out and the cover is loose on the intermediate part of servo. It has 2 orings on it but the servo cover doesn't have a tight contact on it. There is about 40 thou play. Would this cause my shift problem.
Sent from my DROID RAZR HD using Turbo Buick
Sent from my DROID RAZR HD using Turbo Buick
