did some surgery today and found out why my rear end isn't centered.
Here's the original thread
http://www.turbobuick.com/forums/general-turbo-buick-tech/343550-rear-ends-not-centered.html
The frame is rotted at all 3 body bushing locations behind the rear wheels.
I opened up the sheet metal in the trunk to investigate.
Here's the worst one, your looking at the top of the body bushing because the body has rotted out
Here's a pic with the bushing removed, it's going to need some metal fab to rebuild the rotted body
Hopefully this frame repair washer will do the trick on the frame.
The other two are not as bad but will require the same type of repairs.
I'm welcoming suggestions from anyone that has dealt with this situation before, I'm going to need help with this one...
Here's the original thread
http://www.turbobuick.com/forums/general-turbo-buick-tech/343550-rear-ends-not-centered.html
The frame is rotted at all 3 body bushing locations behind the rear wheels.
I opened up the sheet metal in the trunk to investigate.
Here's the worst one, your looking at the top of the body bushing because the body has rotted out
Here's a pic with the bushing removed, it's going to need some metal fab to rebuild the rotted body
Hopefully this frame repair washer will do the trick on the frame.
The other two are not as bad but will require the same type of repairs.
I'm welcoming suggestions from anyone that has dealt with this situation before, I'm going to need help with this one...