Running 93 Extender with Alchy

[Hammer231]

I've currently got an extender chip burned for 93 octane in the car that I've been real happy with but recently I installed Razor's PAC alchy kit. :biggrin: With all the tuning options available in the extender and trans+ do I still need to look at getting my chip re-burned to get the full potential from the alchy setup? Or can I just bump up the timing and lower the fuel to the same parameters as I would have in an alchy chip?

 

[turbofrank]

you can do that

 

[Bens87tr]

I've run it both ways. They both work. Tough to say which ran better as I changed alky kits and injectors + chip at the same time.

 

[Hammer231]

Thanks for the info. I was hoping this would be the last chip I'd have to get for awhile. Haven't had a lot of time lately to tune the new alchy combo but I'm planning on bumping the timing a few degrees and lowering wot fuel a bit on the translator plus experimenting with some of the extender's low gear fuel and quick spool options.

 

[dsa87gn]

hey hammer, any update on this ?..
Ive got and extender for 93 and T+ and will be adding an alky kit.
Wondering if ill need a reburn