easier
push speedo cable under hood into the firewall grommet a few inches
pull the bezel ,
you can remove the four screws and pull the cluster froward , reach your fingers around the back and depress the speedo cable retainer clip then remove the cluster
or unscrew and remove the clear lens, remove the screws holding the fuel level panel and remove that
remove the speedo panel screws and pull it forward
depress the clip and release the speedo from the cable
with speedo out of the way pull out the speedometer cable from the casing and replace or
if you need to pull the casing tape a length of tubing to the end pop the grommet from firewall and pull it out from engine side