repair thdp puck

[et10sec]

i need my thdp , puck repaired, its frozed. will not move, any one replair or replace the puck, thanks ed

 

[Royal-T-Ltd]

i need my thdp , puck repaired, its frozed. will not move, any one replair or replace the puck, thanks ed

You can contact Jason Cramer at RJC, they sell a repair kit and could probably do the work if you wanted them to.


Sent from my iPhone using Tapatalk Pro

 

[et10sec]

i will call, thank you! ed z

 

[TurboBuRick]

Heat it up and spay some pb blaster on it. Get it to move then work the shit out of it.

 

[earlbrown]

I think the correct repair is to cut the arm off, drive the shaft out, ream the hole, then weld the arm back on.


When ATR came out with a THDP copy many years ago, it was very common for those to seize up.

 

[et10sec]

thats what i am thinking, just need to get the parts, thanks ed

 

[et10sec]

still looking

 

[TurboTGuy]

http://rjcracing.com/product/exhaust-systems-2/flanges-weld-bungs/

#RJC-WGA

 

[Royal-T-Ltd]

http://rjcracing.com/product/exhaust-systems-2/flanges-weld-bungs/

#RJC-WGA

yep thats what i tried to tell him in post 1... errr 2. I believe a lot of the older pipes used mild steel and over time they bind and freeze... i know 18-20 yrs ago i had to send my ATR pipe back to them because it was binding... they fixed it for free and never had any issues since.