Rear bushing removal question?

[84_t-type]

Just want to make sure I'm doing this the best way. I was trying to remove the bushings from the rear control arms. I heated them and got the rubber out what is the best way to get the rest of the bushing out?

Thanks

 

[KEVINS]

http://www.baselinesuspensions.com/info/bushing.htm

ks

 

[haywire4130]

Use an air chisel to cave them in and they push right out. You'll need a press or at the least a strong vise to install the new ones, also brace the inside arms with a socket or scrap steel when pressing them in to keep it from squashing. You gonna box them while they're out and bushing-free?

 

[84_t-type]

Use an air chisel to cave them in and they push right out. You'll need a press or at the least a strong vise to install the new ones, also brace the inside arms with a socket or scrap steel when pressing them in to keep it from squashing. You gonna box them while they're out and bushing-free?

I was not planning on it. I am going to replace it later with an upgrade when I have more of a budget. Just want to get it back on the road.