Razor PAC controller issue

[Savageite]

I've been having an on going problem with the kit that I believe is my fault. The kit worked great on multiple dyno runs but I lost the black test button and all I could find at the time was a paper clip. "I know, dumb idea" So basically the prolem I think I have is the button is sticking. The alcohol will spray some times when the car is just ideling. Also it looks like I have the older kit without the Cat-5 connection to the controller under the dash. So am going to have to cut those wires to get the controller out of the car? Any help would be great.

Thanks.

 

[Razor]

Call me and order a new pushbutton switch.

or..

You can also buy similar switch at Radio Shack for about 1.00 normally open push button. Solder it in.. done.

If you cant solder, send controller back and i'll swap out the switch.. 5 minute job.

 

[Savageite]

Thanks again julio. I found one at radio shack that looks real similar to the one you provide. Hopefully by sat. I'll be able to start tuning some more.