qwestion .....
- Thread starter scot w.
- Start date
Matt Sando
Member
- Joined
- Jan 13, 2005
there are some on ebay right now.I think that the company is no longer in buisness any longer.
UMI Performance
Supporting Member
- Joined
- Aug 28, 2004
Hello,
Yes we now offer a lift bar similar to the SSM set-up. Our set-up does offer quite a few benefits over the SSM or Jegs set-up. One being we use a polyurethane bushing rather then a solid bushing, this helps to keep very nice ride quality and noise issues at a minimum unlike a solid bushing set-up. The poly bushings also won't bind as easily as a solid bushing. Another nice feature is since the ears are attached to the outside of the mount rather then the inside (SSM and Jegs) the control arm can be ran back in the stock location at anytime unlike other set-ups that weld inside the mount. With the SSM and Jegs this means you can only ever run there supplied lift bar unless the brackets were cut off, this is not the case with our lift bars. Also the lift bar we supply is the same length as a stock control arm.
Lift Bars- http://www.umiperformance.com/3020.aspx
Another option is you can just buy our relocation brakets and use your control arms.
Relocation Brackets- http://www.umiperformance.com/3010.aspx
If I can help anymore please ask. Thanks
Ryan
Yes we now offer a lift bar similar to the SSM set-up. Our set-up does offer quite a few benefits over the SSM or Jegs set-up. One being we use a polyurethane bushing rather then a solid bushing, this helps to keep very nice ride quality and noise issues at a minimum unlike a solid bushing set-up. The poly bushings also won't bind as easily as a solid bushing. Another nice feature is since the ears are attached to the outside of the mount rather then the inside (SSM and Jegs) the control arm can be ran back in the stock location at anytime unlike other set-ups that weld inside the mount. With the SSM and Jegs this means you can only ever run there supplied lift bar unless the brackets were cut off, this is not the case with our lift bars. Also the lift bar we supply is the same length as a stock control arm.
Lift Bars- http://www.umiperformance.com/3020.aspx
Another option is you can just buy our relocation brakets and use your control arms.
Relocation Brackets- http://www.umiperformance.com/3010.aspx
If I can help anymore please ask. Thanks
Ryan
