Powermaster dead??

[Chuckd]

When I turn the key forward the pump never turns off. NEW accumulator and NEW pressure switch. Brake pedal feels just a little squishy. Is the pump gone??

I dont really want to change over to vac brakes since I just spent $200 on PM parts.

 

[IrvJr]

Check the fuse first. And if you change to vacuum someone will buy all those parts.

 

[GNONYX]

What was your original problem?
Accumulator, or the pressure switch you decided to replace it anyway?

 

[Chuckd]

It was doing the accumulator thing. Sencetive pedal and brake light on. Replace the accumulator bled the brakes, same thing. Replaced the switch, same thing again.

I did the accumulator 1st and when the pump still kept running I went ahead and did the switch.

 

[GNONYX]

It seem you might have more problems than your accumulator or the pressure switch. Check and see if the PM is externally leaking. I sent you an email letting you know if you need some documents to troubleshoot your PM.

 

[zeus87gn]

Chuck,

You have to check for by passing fluid in the system.
See my bleeding thread - there is a section for checking for internal leaks.