Power steering pump question about -AN fittings

[NEVER ENOUGH]

Apparently I need to buy a new power steering pump.
Is there a way to convert a stock pump to use -AN fittings?
Or does anyone know if someone offers a new power steering pump for these cars with -AN fittings already installed?

 

[gnpoweredrail]

Im not sure how you would convert the suction side but they make the -6 fitting to screw into the port.you have to run special line for power steering fluid just so you know.

 

[Taylor04]

Search Function FTW!

http://www.turbobuick.com/forums/brakes-suspensions-tires-wheels/331862-steering-pump-fitting.html

 

[karolko]

i did exactly what you are talking about when i had power steering.

I have all the parts and hoses still lying in my garage if you would like to buy the whole things. I even made a aluminum resivoir to replace the old plastic one .

I bought the fittings through JEGS. The power steering fittings are very expensive, but available.

If you are interested i could just sell you those and you would be off to the races. I used teflon braided hose for the pressure side and i drilled out the fluid inlet port and tapped it with 1/2npt so it could then accept fittings.


Hope this helps.

Adrian

 

[turbohh]

Karolko,
Sent you a PM about your parts...
Turbohh