Spooled231
Member
- Joined
- Jun 21, 2001
The parts were donated from numerous club members these are parts left over that were for a club project car that we were building and now have lost interest. The money will be provided back to the Lone Star Performance Buick Club. All parts are plus shipping and 3% PayPal if used.
1. Stock water pump pulley $20
2. Stock crank pulley $30
3. Complete Stock manifolds $100 Driver side has been welded in the past. Drivers side #5 primary shows a small crack between the tube and flange that will need to be welded. Cross over pipe on the driver side has a small quarter size indention. All connecting flanges are nice and round.
4. Used Koni front shocks adjustable part number 8040 1092 $50
5. Used 9 inch K&N filter with 3 inch inlet. $5
6. Stock chrome upipe with NOS solenoids $50 (chrome is pitted on the under side of the upipe)
7. Ported 8445 heads. $100 Unknown who ported them or what they flow. New valves but unkown size, unknown valve springs. Looks like the head surface is set up for receiver groove head gaskets.
8. Fiberglass one piece bumper, air dam, cold air intake provision on driver side and intercooler scoop. $100 Assembly is prepped and ready to be painted, small crack on the passenger side air dam at the 90deg bend. This is repairable to make it a nice one piece bumper assembly.
Please send emails to johnboyv6@gmail.com or PM for any questions.
Thanks
John Martin
1. Stock water pump pulley $20
2. Stock crank pulley $30
3. Complete Stock manifolds $100 Driver side has been welded in the past. Drivers side #5 primary shows a small crack between the tube and flange that will need to be welded. Cross over pipe on the driver side has a small quarter size indention. All connecting flanges are nice and round.
4. Used Koni front shocks adjustable part number 8040 1092 $50
5. Used 9 inch K&N filter with 3 inch inlet. $5
6. Stock chrome upipe with NOS solenoids $50 (chrome is pitted on the under side of the upipe)
7. Ported 8445 heads. $100 Unknown who ported them or what they flow. New valves but unkown size, unknown valve springs. Looks like the head surface is set up for receiver groove head gaskets.
8. Fiberglass one piece bumper, air dam, cold air intake provision on driver side and intercooler scoop. $100 Assembly is prepped and ready to be painted, small crack on the passenger side air dam at the 90deg bend. This is repairable to make it a nice one piece bumper assembly.
Please send emails to johnboyv6@gmail.com or PM for any questions.
Thanks
John Martin