Parts: Stock, Performance, Fiberglass

[Spooled231]

The parts were donated from numerous club members these are parts left over that were for a club project car that we were building and now have lost interest. The money will be provided back to the Lone Star Performance Buick Club. All parts are plus shipping and 3% PayPal if used.

1. Stock water pump pulley $20

2. Stock crank pulley $30

3. Complete Stock manifolds $100 Driver side has been welded in the past. Drivers side #5 primary shows a small crack between the tube and flange that will need to be welded. Cross over pipe on the driver side has a small quarter size indention. All connecting flanges are nice and round.

4. Used Koni front shocks adjustable part number 8040 1092 $50

5. Used 9 inch K&N filter with 3 inch inlet. $5

6. Stock chrome upipe with NOS solenoids $50 (chrome is pitted on the under side of the upipe)

7. Ported 8445 heads. $100 Unknown who ported them or what they flow. New valves but unkown size, unknown valve springs. Looks like the head surface is set up for receiver groove head gaskets.

8. Fiberglass one piece bumper, air dam, cold air intake provision on driver side and intercooler scoop. $100 Assembly is prepped and ready to be painted, small crack on the passenger side air dam at the 90deg bend. This is repairable to make it a nice one piece bumper assembly.

Please send emails to johnboyv6@gmail.com or PM for any questions.

Thanks
John Martin

 

[Spooled231]

More pics

More pics

 

[Spooled231]

fiberglass bumper and ported heads

Pics of fiberglass bumper and ported heads

 

[Spooled231]

Ported heads

Ported heads

 

[bdasv6]

heads

do u know if these have any cracks

 

[Spooled231]

I looked across the valve seats and spark plugs and did not see any cracks. The guy in the club had these setting on the side for his project and ended up donating them to the club. Overall I would recommend the heads to be dis-assembled and gone through before bolting them to the car.

John

 

[WFO]

4. Used Koni front shocks adjustable part number 8040 1092 $50

Do those shocks have a 90/10 setting?

If so I'll take em.

 

[Bigjack7440]

I'll take the chrome up pipe with the nos soln. What your payment info?

 

[Spooled231]

Do those shocks have a 90/10 setting?

If so I'll take em.

I called Koni this morning asking about the shock settings if they knew the rate of each setting. All the guy was able to tell me that it has multiple settings in 1/2 turn increments up to 2 1/2 turns (This gives you 5 settings). He mentioned that the middle setting is an OE rate and either direction will give you a looser or firmer setting. Id would say that they loosest setting will result in a 70/30 ratio.

Thanks
John Martin

 

[Spooled231]

I'll take the chrome up pipe with the nos soln. What your payment info?

Bigjack7440,

Paypal is blownbuickv6@yahoo.com

How does $57.00 sound? 50 for the part and 7 to cover PayPal and shipping?

Thanks
John

 

[Bigjack7440]

Sound good , money is on the way. What your email and I will email you my shipping info. Or I can pm it to you.

 

[Spooled231]

Sound good , money is on the way. What your email and I will email you my shipping info. Or I can pm it to you.

You can leave it in the PayPal notes or send me an email johnboyv6@gmail.com

Thanks
John

 

[6E-GN]

in on #8 front bumper pending shipping to 01844,thanks

 

[sixgun86gn]

John,I will take the heads,just let me know.

 

[Spooled231]

Update!

#4 Koni's Pending Payment from Davinci50

#6 Up pipe w/NOS Pending Payment from BigJack7440

#7 Ported heads Sold to Sixgun86gn

#8 Fiberglass bumper Pending Payment from Ediberto_Diaz
Second in line HotAirAlky.

Thanks
John Martin

email is the best way to get in touch with me johnboyv6@gmail.com

 

[6E-GN]

#8 Fiberglass bumper Pending Payment from Ediberto_Diaz
Second in line HotAirAlky.

^^^^^^^^^^^^^^^^^^^^

Just count me out then,thanks.........

 

[Spooled231]

#8 Fiberglass bumper Pending Payment from Ediberto_Diaz
Second in line HotAirAlky.

^^^^^^^^^^^^^^^^^^^^

Just count me out then,thanks.........

OK......Ediberto sent a PM an hour before your post. Dont get your whitey tighties in a wad!

John

 

[Bigjack7440]

Payment sent

#4 Koni's Pending Payment from Davinci50

#6 Up pipe w/NOS Pending Payment from BigJack7440

#7 Ported heads Sold to Sixgun86gn

#8 Fiberglass bumper Pending Payment from Ediberto_Diaz
Second in line HotAirAlky.

Thanks
John Martin

email is the best way to get in touch with me johnboyv6@gmail.com

Payment sent via my I phone for the chrome up pipe with NOS . I emailed you my shipping info. Thanks

 

[Spooled231]

#4 Koni's Sold to Davinci50

#6 Up pipe Sold to BigJack7440

Thanks
John Martin

 

[Bigjack7440]

Have you sent the chrome up pipe with nos? I have not seen it yet. Contact me with my email I can't get my pm box to delete any pm's for some reason. Thanks