OFFICIAL: wheel/tire picture thread... show em off!

014.JPG
006.JPG
006.JPG
18x8 RPM wheels 245/45/18 Goodyear F1 Front
18x9 RPM wheels 275/40/18 Goodyear F1 Rear
 
ESM, too bad about the spacers but otherwise looks good. did you buy 5x120 and it slipped on ok?
 
CAR: 87 Turbo-T
Wheel size:
FRONT: 15x7
REAR: 15x8
Back spacing:
FRONT: 4.0 inch
REAR: 4.5 inch​
Tire size:
FRONT: 26x8.0 Mickey Thompsons
REAR: 275-60-15R ET Streets Drag Radials​
[U]Make/Model of tire:[/U] Mickey Thompson front and rear
[U]Make/model of wheel:[/U] Summit racing Fast Five Rims
Brakes: Stock
Aftermarket Spindles: N/A
No rubbing, and no spacers at all. And for $468.40 with lugs shipped to my door i can't complain.:)

IMAG0633.jpg
 
CAR: 86 GN
Wheel size:
FRONT: 17x8
REAR: 17x8
Back spacing:
FRONT: 4.5 inch
REAR: 4.5 inch​
Tire size:
FRONT: 245/45/17
REAR: 255/50/17
Make/Model of tire: Nitto 555's
Make/model of wheel: Boyd Coddington Timeless 5's
Brakes: S10 wheel cyn bigger shoes in the rear. Driiled rotors up front
Aftermarket Spindles: Stock
Will post pics later
 
CAR:

Wheel size:

FRONT:15x6
REAR:15x8

Back spacing:
FRONT:3.5
REAR:4.5 used 5/16 in spacer to clear frame


Tire size:

FRONT:Falken 205/65/15
REAR: Nitto 275/50/15


 
Front: Weld Star RT 15x5 with 2 1/2 backspacing. Tires: Mickey Thompson S/R 26x6-15
Rear: Weld Star RT 15x9 with 4 1/2 backspacing. Tires: Mickey Thompson ET Street Drag Radial 295/55-15
Standard drums on the rear, no notched frame, no rolled fender lips, stock height springs.

IMG_6727m.jpg


IMG_6718m2.jpg
 
toomanymodz said:
Front: Weld Star RT 15x5 with 2 1/2 backspacing. Tires: Mickey Thompson S/R 26x6-15
Rear: Weld Star RT 15x9 with 4 1/2 backspacing. Tires: Mickey Thompson ET Street Drag Radial 295/55-15
Standard drums on the rear, no notched frame, no rolled fender lips, stock height springs.

That is SICK!!! Nice work
 
i have one word for that asz end mr toomanymodz.....level'd:cool: ...fukn drives me nutz looking at the unlevel'd asz end of my car...always trying to level it with the air bags but i know it needs some frame braces.
 
I noticed that you mentioned that you had an LS1 brakes. Did you take them from a Camaro and they drop in??
 
New wheels and tires just installed. 16x8 Torq thrust D. 4" back spacing. BFG gforce sport comp 2, 245/50-16 front 255/50-16 rear.
 

Attachments

  • Torq thrust D.jpg
    Torq thrust D.jpg
    1.2 MB · Views: 886
CAR: 1987 Buick GN

Wheel size:

FRONT: 15" X 6"
REAR: 15" X 7"

Back spacing:
FRONT: 3 3/8"
REAR: 3 3/4"


Tire size:

FRONT: 215 / 65
REAR: 275 / 60

Make/Model of tire: BFG TA in front BFG Drag Radials in rear


Make/model of wheel: American Racing TT2

Brakes: Vacuum brakes - SSBC dual piston callipers up front and 11" Ford drums out back

Aftermarket Spindles: Yes, Bell Tech


Here's my current setup soon to be replaced with Centerline Rev wheels thanks to pictures of Todd Kay's car!!! Same tires but going 15 x 8" in the rear with 4" backspace.

CAR: 1987 Buick GN

Wheel size:

FRONT: 15" X 6"
REAR: 15" X 7"

Back spacing:
FRONT: 3 3/8"
REAR: 3 3/4"


Tire size:

FRONT: 215 / 65
REAR: 275 / 60

Make/Model of tire: BFG TA in front BFG Drag Radials in rear


Make/model of wheel: American Racing TT2

Brakes: Vacuum brakes - SSBC dual piston callipers up front and 11" Ford drums out back

Aftermarket Spindles: Yes, Bell Tech


Here's my current setup soon to be replaced with Centerline Rev wheels thanks to pictures of Todd Kay's car!!! Same tires but going 15 x 8" in the rear with 4" backspace.
Do you have any pics of the centerline revs on your car? thx
 
Top