New best in the 1/8th

[scot w.]

There is only 1/8th mile tracks around here and this was my best to date.

06/23/2007 @ 411 dragway. 90+deg and VERY HUMID!
My hair was soaked after taking the helmet off after just one run!!

*On 93 octane & Razors alky dual nozzle kit*
ET - 7.093
MPH - 99.80
RT' - 1.627
330' - 4.595
26x10x15 M/T slicks
10lbs boost T-brake launch
21deg of timing
Dual nozzle Alky kit

This was with a full weight 3600lb car with power seats, power windows, power locks T-tops, Ice cold air.

3:42 stock rearend gears
stock block
stock crank
stock rods
stock suspension eccept a H&R bar and dual air bags.

 

[Blazer406]

Congrats.....

I hate I didn't get to meet you in BG this year..... I saw the car once.... seems like over at the dent repair guys trailer... just never got a chance....

Sweet car.

 

[pacecarta]

congrats !! nice 10 second pass ,

only takes a 7.0 to reach 10s ( 10.99) ,
your 60' wasnt spectactualar , with a 1.55 would have been a lower et like 6.95-7.0) and your mph was better than should be for the 1/8 time so if the car can complete the 1/4 at the level you have it now it should easily run into the 10s

 

[scot w.]

Thanks for the compliments guys! still working on things but it should get there soon...

 

[V6POWER]

Great run. How much boost?

 

[ttypewhite]

Good stuff Scott, Congrats.

 

[scot w.]

Great run. How much boost?

Oops! 24lbs :biggrin:

 

[plowboy72]

Pretty fast Scott. Congrats.

 

[Boost231]

congrats. that thing is moving.

 

[SGRIM]

Great job! That should be a 10 in the 1/4!

 

[scot w.]

Thanks All !! Iv'e found a couple issues that i think were holding me back a little. The heads were not re-torqued after i installed it so they were lifting at higher boost and was losing compresion out of one cyl. and when i took my down pipe off i noticed that the wastegate puck was not sealing to the exhaust housing. Some simple things to fix and hopefully it will make a differance.

Scot w.

 

[scot w.]

Update!

New 1/8th mile times:

60' 1.59
ET 6.76
Mph 104.2

Getting there! Hope next year will be better.....