Pics here: Pictures by ginorin - Photobucket
parts in pics not listed here have been spoken for or are sold!
BRAND NEW Razor's Alky Kit, still sealed in plastic, as new. Paid $475 shipped, sell for $425 shipped
NOS 87 GN/GNX/WE4 Grille, as new. Genuine GM $400 I have 2 available.
NEW Wilwood Dynalite pro 4 piston front brake kit, complete with modified spindle. Installed on car but never used, as new condition. Black powdercoated calipers, complete with wilwood braided stainless lines as well $850 complete, bolt on and go.
NEW fabricated aluminum resevoir kit from GN1 Performance, includes coolant overflow, washer fluid, and power steering. Includes caps as well. Never used. $375
Genuine GM LS1 Maf sensor, only a couple hundred miles of use. Also have wire harness adapter for use with MAF translators. - $150/both
Full Throttle Extender chip for 60# injectors, for use with above Gen II Translator $75 shipped
NEW Full throttle extender chip for 60# injectors, 104 octane with anti theft, never used $95 shipped
Stock 86/87 Lower intake from a 27k mile engine, perfect shape no messed up threads, untouched/unported $250
NEW Race ported and polished 86/87 lower intake, done professionally, really nice job. Matched to a Fel Pro 1200. Intake has EGR welded and smoothed, it has been powdercoated argent silver and clearcoated. Showcar quality. Will include polished ARP stainless intake bolts. Top notch stuff, never used since port/polish/powdercoating. I have $750 in parts/labor invested, not to mention the intake core itself. $600 takes it.
60# injectors, brand new $300 shipped
100% billet adjustable fuel pressure regulator, silver in color. nice shape $100 shipped
rail mount fuel pressure gauge, chrome with silver face. nice shape $50 shipped
40# injectors with Kenne bell 93 octane chip, work great. 5k miles use $225 shipped
42# injectors with 93 octane chip, work great. low miles $225 shipped
NEW aluminum radiator with engine oil and trans oil coolers installed, very nice piece $400
stock computer with calpack $100
stock intercooler nice shape no shroud $100 3 available
stock intercooler with nice shroud $150
*.030 over 84/85 block for use in 86/87 application with caps and 86/87 oil drainback tube already done, low miles on bore $300
*stock 2-dot rods with .030" over hyperuetectic pistons and SPS rod bolts, balanced includes rings $300
*flexplate and balancer with crank ring $100 for both.
*stock turbo crank that is already ground 20/20, will need another 10 to clean up - Free with any other purchase
*stock heads with 100# valvesprings, complete $200
*rocker assemblys for both heads nice shape $50
*I'll make a package deal on the longblock parts, $700 for all!!!!!
Stock Downpipe with Gutted Cat $100
87 GN rolling chassis, G80 posi, clean WI title, new paint on the Body tub, very nice. $5000/obo need it gone Pics here: 87 Buick GN Rolling Chassis pictures by ginorin - Photobucket
parts in pics not listed here have been spoken for or are sold!
BRAND NEW Razor's Alky Kit, still sealed in plastic, as new. Paid $475 shipped, sell for $425 shipped
NOS 87 GN/GNX/WE4 Grille, as new. Genuine GM $400 I have 2 available.
NEW Wilwood Dynalite pro 4 piston front brake kit, complete with modified spindle. Installed on car but never used, as new condition. Black powdercoated calipers, complete with wilwood braided stainless lines as well $850 complete, bolt on and go.
NEW fabricated aluminum resevoir kit from GN1 Performance, includes coolant overflow, washer fluid, and power steering. Includes caps as well. Never used. $375
Genuine GM LS1 Maf sensor, only a couple hundred miles of use. Also have wire harness adapter for use with MAF translators. - $150/both
Full Throttle Extender chip for 60# injectors, for use with above Gen II Translator $75 shipped
NEW Full throttle extender chip for 60# injectors, 104 octane with anti theft, never used $95 shipped
Stock 86/87 Lower intake from a 27k mile engine, perfect shape no messed up threads, untouched/unported $250
NEW Race ported and polished 86/87 lower intake, done professionally, really nice job. Matched to a Fel Pro 1200. Intake has EGR welded and smoothed, it has been powdercoated argent silver and clearcoated. Showcar quality. Will include polished ARP stainless intake bolts. Top notch stuff, never used since port/polish/powdercoating. I have $750 in parts/labor invested, not to mention the intake core itself. $600 takes it.
60# injectors, brand new $300 shipped
100% billet adjustable fuel pressure regulator, silver in color. nice shape $100 shipped
rail mount fuel pressure gauge, chrome with silver face. nice shape $50 shipped
40# injectors with Kenne bell 93 octane chip, work great. 5k miles use $225 shipped
42# injectors with 93 octane chip, work great. low miles $225 shipped
NEW aluminum radiator with engine oil and trans oil coolers installed, very nice piece $400
stock computer with calpack $100
stock intercooler nice shape no shroud $100 3 available
stock intercooler with nice shroud $150
*.030 over 84/85 block for use in 86/87 application with caps and 86/87 oil drainback tube already done, low miles on bore $300
*stock 2-dot rods with .030" over hyperuetectic pistons and SPS rod bolts, balanced includes rings $300
*flexplate and balancer with crank ring $100 for both.
*stock turbo crank that is already ground 20/20, will need another 10 to clean up - Free with any other purchase
*stock heads with 100# valvesprings, complete $200
*rocker assemblys for both heads nice shape $50
*I'll make a package deal on the longblock parts, $700 for all!!!!!
Stock Downpipe with Gutted Cat $100
87 GN rolling chassis, G80 posi, clean WI title, new paint on the Body tub, very nice. $5000/obo need it gone Pics here: 87 Buick GN Rolling Chassis pictures by ginorin - Photobucket
