BM Computer Src
New Member
- Joined
- May 28, 2001
Hey guys,
I have a set of fresh 8445 heads, with new stainless 1.77" and 1.50" valves, 3 angle competition valve job, full porting and polishing and flow sheet to go with it as well. Max flow was about 208 CFM, and the sheet provides the details. They are freshly decked flat, and have not been bolted up yet. Also new springs (Comp 980's) are on with new seals, locks and retainers. All work was performed by www.pm-fl.com
This set is ready to bolt up, and will really help provide more power and lower the needed boost levels.
Please email me at bob@bmcomputersource.com if you are interested, or call me at 727-233-1195. Shipping is $45 flat rate, across the continental USA.
Thanks,
Bob
I have a set of fresh 8445 heads, with new stainless 1.77" and 1.50" valves, 3 angle competition valve job, full porting and polishing and flow sheet to go with it as well. Max flow was about 208 CFM, and the sheet provides the details. They are freshly decked flat, and have not been bolted up yet. Also new springs (Comp 980's) are on with new seals, locks and retainers. All work was performed by www.pm-fl.com
This set is ready to bolt up, and will really help provide more power and lower the needed boost levels.
Please email me at bob@bmcomputersource.com if you are interested, or call me at 727-233-1195. Shipping is $45 flat rate, across the continental USA.
Thanks,
Bob
