Manual Boost Controller Vacuum Lines

[TurBo BiRd]

Does the line from the wastgate go to the inlet on the boost controller w/ the relief hole?

 

[scottyb]

I assume you're talking about the y connector. The pressure line (from the turbo) goes "straight thru" the "y" to the solenoid. The angled port on the "y" goes to the actuator. And the bottom of the "y" is the end that connects to the solenoid.

 

[TurBo BiRd]

Im putting a manual boost controller on. Just a knob. One of the parts thats the vaccuum lines hook up to has a small hole for relief. I need to know which line goes to that one.

 

[scottyb]

oops, sorry.

Is it a bleeder valve of some sort?
Do you have the stock-type actuator with one port?

 

[TurBo BiRd]

Its the stock actuaor turned into an ajustable.

 

[OneLethal87GN]

Instead of running your hose from the turbo to the wastegate solenoid, run it to the adj. boost knob. Leave the other hose running to the actuator. The only problem I'm having is steady boost. I think it may be my downpipe though. I've heard they have had problems with the ATR 303.

 

[TurBo BiRd]

I need to know which hose to run to which part of the boost controller.