I got it connected...and I even went so far as to probe the wire for power on either side of the connection.....all good.
Slow 85 - I'll have a look there...at the gnttype site - see if that helps me...but for right now I have ordered a new cam sensor from GM. Unless anyone want to chime in and sell me a used one...? Mike @ M+M ???
I am definitely annoyed now....Nocooler...I don't have the SES light come on when I turn the key to "ON" or "START". Does this mean something ? I have checked power to ECM and it is good on both sides of the connection near the battery.
Is the light supposed to come on ?
Bad ECM ?
I was thinking it might be my crank sensor too....the link that SLOW_85 gave shows at the bottom of the service manual page that the sensor must be gapped at .025 to the ring on the harmonic balancer...the sensor is new and I dont think it was gapped properly when it was installed.
Thanks SLOW_85 for the post on the sensor for sale !
So I have no SES light upon key "ON" . I will check the bulb (good idea) then I will assume if it is good that I have a bad ECM. I get all the other idiot lights but the SES light.
I have power to it though...checked that hoping it was a fuseable link.