Is there a wiring harness connector plug that attaches to this single prong on this switch?

[whitehot1]

http://www.autozone.com/electrical-...6/6-cylinders-7-3-8l-sfi-ohv-turbo/18755_0_0/

In these photos it shows two 2 prong connectors and a single 1 prong connector. I can see the wiring harness connector plugs that go to the two 2 prong connectors but i can't see if there is a wire connector plug going to that single 1 prong connector.

Thanks in advance for the help.

My eyes are not as good as they used to be.

 

[RmvBfrFlght]

I don't know if that switch will work or not, although it likely will work. I do know that what is written about the functionality of that switch on the Auto Zone site is incorrect. The ECM in our cars have nothing to do with the starter engaging or not, along with the transmission being able to go into gear.

In our cars there isn't a P/N safety switch. The column switch in our cars are only for the back up lights and the P/N input to the ECM. Which is why there are only two 2-prong connectors for it. See my posts in this thread for further information (also has pictures):

http://www.turbobuick.com/forums/threads/no-power-to-the-purple-wire-on-starter.429380/

RemoveBeforeFlight

 

[whitehot1]

Is there a wiring harness connector plug that goes to that single 1 prong connector.

 

[whitehot1]

Got it! All taken care of.

Thanks