how do I remove a GN power seat properly???????????

[CYBORG-GN]

Ok, i have successfully removed the passenger seat, that being said, i am not shure how to tackle the power seat???/....any tips???????

 

[03FatBoy]

Run the seat to either to the forward or back position, remove the appropriate hold down nuts. Run the seat to the other position and remove the remaining nuts. Disconnect the power lead to the seat and remove!

 

[aminga]

In the rear remove the little nails so the covers will come off the bolts

 

[CYBORG-GN]

gidday, unfortunately, with it being a power seat I am kinda screwed for moving it as the seat is in a junker car with no power so shifting it back and fourth is impossible...not too shure wtf to do??

we endud up having to use a saws all to remove the passenger seat becasue the bolt heads were wso rusted so we cut it off at the posts....that being said atleast the seats are in decent condition.

any helpplease send it my way, thanks.

 

[fastlikeanascar]

Use a jumper box and hotwire it.. That's how I just had to do mine.

 

[turbobully]

cut the brackets w/ a sawzal if its a junk car and if you have other seats you can re-use the old brackets