Help - A pillar gauge pod install

[Rogue74]

I wanted to ask people who have an A pillar gauge pod installed, how they routed the wires. I'm thinking you might be able to run them out of the driver side dash speaker opening over to the pillar. I just figured I would ask here before I tear the car apart and do it a more complicated way or something. Thanks in advance.

 

[Paul Clark]

I just ran the wires up the far left side of the dash and tucked them in.
How many pods on your gauge holder?

 

[UCTaillights]

Take off the kick panel plastic, the piece that runs adjacent to the dash, and the a-pillar (of course). Remove those three and you'll have a straight shot from underneath the dashboard to the new pillar. If you're putting a boost gauge in, that's definitely the way to go because you don't want any kinks or sharp bends in the vacuum line going into the gauge.

 

[87ttypeV8]

what UC said... same way i did it to my pillar and working good... very easy to do and conceals all the wires!

 

[Rogue74]

Thanks! That will save me some headaches!