engine rebuilders in dallas?

[natethegreat85]

Are there any shops in DFW that will do a quality rebuild for our motors? I have two motors - an 85 and an 86 that I need rebuilt. the 85 is in the car, the 86 is complete with harness on a stand. -Nathan

 

[charlief1]

Arlington Machine is the one that the Lone Star Buick guys have used with good success.

 

[fast86gn]

Also JL Enterprises located 25 miles east of Dallas. Owner Jack Laswell M-F 972 412 9000. except next week Vacation time.

 

[SuperCPA]

If you are on the south side of the metroplex you might give LSPBC member Duke McClain a try as an alternative. He has a built a very quick LC2 for his T-Type and has a lot of tricks up his sleeve too.

http://www.macsturboperformance.com/
http://www.macs-power.com/

 

[fast86gn]

A ad for Texas Pro 5.0 with a pic of a car with a 3.8 lol

 

[natethegreat85]

thanks guys!

 

[John B .]

Arlington Machine is the one that the Lone Star Buick guys have used with good success.

Looked for this Arlington Machine but couldn't find contact info, anyone have a # I can call ?

 

[HouseofSpeed]

Check with Watt up in the Lavon area.....Trevor Johnson does head work out of Watt's shop as well and he is a Buick brother that knows the LC2 very well. 214-914-4678

 

[captrob]

Watt did an engine for me when he was in Royce City and did a fantastic job. Trevor did my heads through Jay Carter years ago and they were beautiful and flowed amazing. Recommend both


Posted from the TurboBuick.Com mobile app

 

[HouseofSpeed]

Both good dudes..Trevor and I are SAM graduates and former SAM instructors....also the only Buick guys that were there in the late 90's....LOL

 

[SuperCPA]

Looked for this Arlington Machine but couldn't find contact info, anyone have a # I can call ?

Arlington Automotive Machine
511 E Main St Arlington, TX 76010
(817) 261-9022

https://plus.google.com/102965850707519994765/about?gl=us&hl=en

 

[TexasT]

I stopped by Arlington machine yesterday and Greg Kring's name came up. The machinest said he had done two Buick blocks for him this year so far.so he is still putting them together. You might try to get ahold of Greg. Though I don't have any contact info for him.

Posted from the TurboBuick.Com mobile app