I noticed you are using a stock oil pump pickup with the RJC girdle. You did not have an extension on the pickup. Did you check the pickup height against the pan you are using? I have found that the pickup is almost NEVER correct!!!!! It usually sits too high in the pan which makes it easier to suck air when turning a corner or accelerating/braking hard. Very easy to check. Put a plastic bag over the pickup and a piece of clay (playdough works great)
Ok,I did put the pins on the block.Also the oil pickup extension that comes with the girdle is instaled.
I am using stock valve covers with RJC extension.The oil pickup is the stock one and I did check the
clerance with the oil pan.