Egr delete info needed

[Brad_H]

I have a tt chip and block off plate and plug....my question is can I get rid of the egr solenoid as well without any issues?

 

[Sweet6]

Yep

Posted from the TurboBuick.Com mobile app

 

[Brad_H]

Sweet

 

[Brad_H]

Yep

Posted from the TurboBuick.Com mobile app

What about the egr diagnostic sw?

 

[Sweet6]

Take it all out

Posted from the TurboBuick.Com mobile app

 

[Brad_H]

Take it all out

Posted from the TurboBuick.Com mobile app

K thanks

 

[DCG]

Could you tell me what size plug you used for the intake.

Posted from the TurboBuick.Com mobile app

 

[Brad_H]

Bought the kit from gbody

 

[DCG]

Damn no one knows that thread size. G body says its some one of a kind thread pitch. Guess that's the only option. What is the egr diagnostict switch?

Posted from the TurboBuick.Com mobile app

 

[turbonut85]

Just take your stock egr tube, cut the end of the tube off, so the threaded nut is free, then split the tube, flatten it, and cut a disk out of it....use some high temp rtv, and place the disk inside the hole...then screw the nut in sandwiching the disk in the hole....done and done.

 

[turbonut85]

Or....you can just have the egr hole welded shut inside the intake and you wouldn't need to plug the hole....

 

[DCG]

Good idea. I think I'll go with the first option.

Posted from the TurboBuick.Com mobile app

 

[Brad_H]

Or you can use a freeze plug

 

[Brad_H]

Could you tell me what size plug you used for the intake.

Posted from the TurboBuick.Com mobile app

I think I seen something saying that it's a custom thread size that you can't buy at hardware stores. Had to be machined

 

[Black Mamba 85]

i just deleted mines went to home depo the piping section got 3/4 plug fit right in no problems 3bucks put some rtv around the threads thats it