Accel Gen 6 Question

[whtturbot]

Can someone please tell me what the setting should be for the AE Fuel Limit Map. It is located in the Global Menu under "Configure ECM". Im confused because my car has a 3bar map and the setting im worried about is set at 1.04. Again this is for the accel DFI gen 6.

TIA

Jeff C
87 T (for sale)

 

[HighPSI]

Every car is a little different. I usually shoot for a little higher (around 120's) depending on how quick the turbo spools.

 

[whtturbot]

Thank you very much for the quick response. Im also chasing down a bit of a hard start issue. When the car is cold it starts right up. Once the car gets up to temp if I shut it off, the car has a hard time starting. I actually have to crack the throttle slightly to get it to start. Any ideas on that one??

Thanks

Jeff C

87 T (for sale)

 

[HighPSI]

Either more IAC starting position or less cranking fuel at the warmer temps

 

[whtturbot]

Cal,

Thanks again !!!! Great to know someone out there still cares enough to pass along there gathered information. I will try to fool with that table tomorrow.

Thanks

Jeff C
87 T (for Sale)