86 GN - Parting out entire car

Price for driver seat and ALL brackets/mounting pieces? I really just need the mounting stuff. Mine broke.

-Will
Just sold the front and rear seats with all plastic.
Thank you for looking and inquiring. I'll post an updated parts listing.
Lee
 
I am looking for the front header panel. Mine is cracked and needs replacement. I also need a complete driver's door due to a break-in.
Do you still have these parts and what is the condition/cost?
Thanks.
The header panel is sold. if the deal falls through, I'll PM you. I have a perfect driver door. Do you need window and all mechanisms?
Lee
 

Attachments

  • Driver door.pdf
    750.2 KB · Views: 4
Could i see pics of both....plastic passenger and driver side concert sound lower panels
 
Updated list of parts as of 5-7-12 - REDUCED PRICES​
Thanks for looking everyone!​
TYPE Ask PART​
86 GN frame and body $500 (very rusty with all new metal ready to weld in) Clear title (no windows, doors, front end, trunk, interior)​
body $50 ~~~ all inside door parts for driver door​
body $50 ~~~ all inside door parts for passenger door​
Body $Make offer ~~~ GN Black Trim (everything except top of front window and 4 wheel well mouldings)​
body $125 ~~~ driver door​
body $75 ~~~ driver front fender​
body $20 ~~~ Driver window​
body $35 ~~~ front Buick Emblem​
body $150 ~~~ front plastic headlight header​
body $100 ~~~ GN black - rear bumper assembly​
body $30 ~~~ GN black - rear plastic part that goes behind gas tank filler​
body $35 ~~~ GN emblem A​
body $35 ~~~ GN emblem B​
body $35 ~~~ GN emblem C​
body $35 ~~~ GN emblem D​
body $30 ~~~ Intercooled Emblem C​
body $150 ~~~ Original GM front grill​
body $125 ~~~ passenger door A​
body $20 ~~~ Passenger window​
body $80 ~~~ rear bumperettes (2)​
body $75 ~~~ Original Steel Wheel A​
body $75 ~~~ Wheel B​
body $75 ~~~ Wheel C​
body $75 ~~~ Wheel D​
Chassis $60 ~~~ back side windows - right and left​
Chassis $250 ~~~ wiring harness - less engine harness​
Chassis $60 ~~~ front stablizer​
Chassis $65 ~~~ passenger door (rusty)​
Chassis $50 ~~~ rear stablizer​
Chassis $65 ~~~ rear window​
Chassis $50 ~~~ rearview mirrors (driver only)​
Chassis $125 ~~~ steering box​
Chassis $50 ~~~ wheel well Driver​
Chassis $50 ~~~ wheel well-passenger​
Drive-Trn $60 ~~~ air cleaner box​
Drive-Trn $75 ~~~ drive shaft​
Drive-Trn $125 ~~~ exhaust​
Drive-Trn $80~~~ headers​
Drive-Trn $50 ~~~ idler pulley​
Drive-Trn $60 ~~~ Intercooler​
Drive-Trn $35 ~~~ Intercooler clamps and hoses​
Drive-Trn $100 ~~~ radiator​
Drive-Trn $280 ~~~ turbo charger​
Electrical $60~~~ alternator​
Electrical $60 ~~~ cruise control unit​
Interior $45 ~~~ GN - glovebox​
Interior $30 ~~~ heater controls​
interior $35 ~~~ plastic driver side concert sound lower panel​
interior $35 ~~~ plastic driver side non-concert sound lower panel​
Interior $30 ~~~ plastic driver side sail panel A​
Interior $30 ~~~ plastic driver side sail panel B​
Interior $30 ~~~ plastic passenger side sail panel A​
interior $35 ~~~ plastic passenger side concert sound lower panel​
interior $35 ~~~ plastic passenger side non-concert sound lower panel​
Interior $30 ~~~ plastic passenger side sail panel B​
Interior $30 ~~~ plastic rear window break light /with metal mount​
interior $25 ~~~ Rear Seat Matt​
Interior $40 ~~~ shifter (Rusty)​
Interior $80 ~~~ steering wheel​
Interior $120 ~~~ tilt stearing column​
Interior $80 ~~~ turn signaling system​
Thanks for looking everyone! Happy shopping...​
 
interested in intercooler shroud only will you seperate and can i get some detailed pics?jim
 
interested in intercooler shroud only will you seperate and can i get some detailed pics?jim
Here's the intercooler shroud. The bottom "scoop" is in rough shape and I didn't include that in the picture. Here's what I have.
Lee
 

Attachments

  • shroud.pdf
    440.3 KB · Views: 3
Top