86/87 T Type/GN Used Parts

[tbirdv6]

pm sent 3 days ago, whats up ?

Dude, you must have me mixed up w/somebody else, this is the last & only PM you've sent me:


April 9th, 2007 pix please
04:46 PM BMF_Racing

So what would you like know?
FRED

 

[V6UnderPressure]

Hey there!!! VERY interested in the grill. What does it look like? Put me first in line please pending description. Is it the same as the 86 GN grill?

Scott

 

[mark ace]

p.m. sent

 

[ALVAROG1983]

fan has no plug attached-has lug bolts that you attach your terminal to
$15 to ship
FRED

if the fan works i'll take it do you take paypal thanks by the way do you have the bolts to mount it..

 

[tbirdv6]

if the fan works i'll take it do you take paypal thanks by the way do you have the bolts to mount it..

Haven't heard back from the previous person that wanted the header panel
approx via UPS to its over size is $81, to pack it correctly so as to arrive healthy(mail box plus) $22
I'll cover the packing- so total would be $150(header)+$81(shipping)=$231
Let me know if you still want it
FRED

 

[tbirdv6]

Hey there!!! VERY interested in the grill. What does it look like? Put me first in line please pending description. Is it the same as the 86 GN grill?

Scott

T Type Grille,has the T type emblem-other than that the same-condition is only as a daily driver

 

[tomcatturbo]

Hi Fred

Please hold the intercooler brackets for me. I appreciate it.

 

[bison]

paypal sent

 

[ALVAROG1983]

Haven't heard back from the previous person that wanted the header panel
approx via UPS to its over size is $81, to pack it correctly so as to arrive healthy(mail box plus) $22
I'll cover the packing- so total would be $150(header)+$81(shipping)=$231
Let me know if you still want it
FRED

did you get my email also how about 181.00 for the header thaks

 

[tbirdv6]

paypal sent

Thanks Brian,
Going out tommorrow in 2 boxes
FRED

 

[tbirdv6]

did you get my email also how about 181.00 for the header thaks

Never received your email
Not going to spend $105 in shipping & supplies(boxes,bubble wrap,popcorn) & only get $76 for header(orginal asking price is $150)TOO nice of a piece to give away
FRED
turbobuick4@yahoo.com

 

[tbirdv6]

Hi Fred

Please hold the intercooler brackets for me. I appreciate it.

Mike,
its packed away in the shed,probally look for it this weekend
FRED

 

[tbirdv6]

Update

UPDATE

86/87 T Type/GN Used Parts



200r4 tranny BRF,Out of a 87 GN
Had a recent stock rebuilt, but was noisy-pulled drive shaft & tail end ball bearings came out
Shifted nicely before & during noise
Maybe all it needs is new tail shaft bearings?
Most definately good for a core if nothing else-make offer?

Factory Oil cooler adapter and lines-2 complete sets available-$50 ea
used-but in nice condition stock 200r4 tranny pans-$30 ea
Nice tranny inspection cover-$35
Red's Volt Booster-$35

STOCK FAN $25
STOCK T Type HEADER PANEL-Nice Condition & Orginal- $150
86 T-TYPE GRILL $25
STOCK PASS SIDE HEADER $75
RADIO FROM A 442 FITS/WORKS $25
GN CENTER CAP $10
2 REAR GN SEAT BELTS (PULL OUTS) $20 ea
FRONT FIBERGLASS BUMPER FILLER-$30-SOLD
AIR DAMS $20
HEADLIGHT BEZELS- 2 CHROME-$15 ea,
1 BLACK- $35-SOLD
FRONT TURN SIGNALS UPPER CHROME $20 ea

VDO-Competition Series Gauges 2 1/16
EGT w/Probe= $60
EGT w/o probe= $40
A Pillar Guage Holder (2 guages) matches GN Pillar-no cracks or scratches,but has alittle warpage(florida sun) but still fits great-just not of show quality (only if your very particular)
$10 w/any above gauge purchase
1 Piece Anodize UnderDrive Crankshaft Pulley -$50
Brand new 4 x 10 to 6 x 9 speaker adapters-$20
EGR Block Off Plate -power six logo-$15-SOLD
S & B Filter (7") Chrome, has difuser & cone opening @ end as to being able to run a flex hose to it to pick-up more air (cold?)-fits our 3" mass air-$25

Coil Pack Bracket-$25
Stock Intercooler Brackets (2)- $50-PENDING
Alternator(120 amp)-$35-SOLD
Starter w/bolts-$25
Complete Rocker Arm Assembly(2) (Shafts/Rocker Arms)-$30
K & N 14" Filter-$35
Rear Bumperettes (2)w/rubber pads-good condition-$50
Chrome Powermaster Resevoir Lid (lightly pitted, great 5 footer) $15
GN Console Lid w/Hinge (no rips ,tears, or cracks)$35
OEM Timing Gears(2) & Chain-almost new(Nylon Gear-no signs of wear,no chipped teeth)-$35
EGR Vacuum Control-$35
Crank Pulley-$25
Metal Lines that start @ vacuum block & runs over to Drive Side-$35
Door Sill Plates (pair) $40
Thrasher 50 lb inj. computer chip-$25

turbo shield bracket(bolts to the head and to the turbo for the shield)-$40
Chrome/aluminum rectangle headlight retainers(4) -$25

AlkyControl Pump aka Razor- never used since refurbished(upgraded & bench tested)$100
Up Pipe(intercooler to throttle body) drilled for alky nozzle-$25

Shipping not included
Accept Paypal(add 3%)Acct= turbobuick4@yahoo.com
FRED

 

[87GNasty]

do you have a passenger front bumper filler?

thanks
Rob

 

[regulz]

.

 

[tbirdv6]

do you have a passenger front bumper filler?

thanks
Rob

sorry-I don't
FRED

 

[tbirdv6]

i dont know if you got it, but i sent you an email regaurding the console lid

Yes I did-just decided to keep it this morning
FRED

 

[MoeJr]

Sent PM about Trans if still available.

 

[tbirdv6]

Sent PM about Trans if still available.

Tranny has been sold!

 

[ALVAROG1983]

do you have a passenger front bumper filler?

thanks
Rob

i got one rob if you still need one

al