85 t-type harness

[78maliburat]

anyone make the wiring harnesss from computer to engine ?? ..mice ate mine lol

 

[Waco84GN]

Caspers makes one but....

Be prepared to pay about 350 for it. I purchased one on ebay a while back so they do come up every now and then just have to keep an eye out for them.

Jerry

 

[charlief1]

If you go to GN/TType.org they have a listing of which harnesses will fit the turbo cars along with what you need to modify to make them work.

 

[Boost231]

CRE Loaded 6 - CEI - Casper's Electronics, Inc.

 

[78maliburat]

Im gonna sell the motor out of the car just wanted to know about a replacement harness to pass along to buyer..thx guys

 

[78maliburat]

if you go to gn/ttype.org they have a listing of which harnesses will fit the turbo cars along with what you need to modify to make them work.

could you send me the link ..i couldnt find it over there .. Thanks ..bill

 

[Waco84GN]

Here is the link

Wow gone up in price alot

CEI - Casper's Electronics, Inc.

Here ya go,

Jerry

 

[charlief1]

I'll post a link later. I'm just finally getting to my email notices and have to work open to close tomorow so I'm trying to get to bed as quickly as possible tonight.

 

[Jerryl]

I wanted to contact Caspers to make a custom harness to clean up the engine bay; Install all the wires (snake) on the firewall in the rear and pull the sensor wires from the back to the front.

The harness would include the connectors for the 86-87:
Crank sensor, coolant temp sensor, coil pack, TPS, injector harness, plus provision for the IAT (2), and wires for FP and WB logging and extra MAP connector plus build in 40A HW with connector.
That would be a winner IMO.

 

[turbonut85]

If you need a decent stock engine harness, I have an extra one...