I'll post a link later. I'm just finally getting to my email notices and have to work open to close tomorow so I'm trying to get to bed as quickly as possible tonight.
I wanted to contact Caspers to make a custom harness to clean up the engine bay; Install all the wires (snake) on the firewall in the rear and pull the sensor wires from the back to the front.
The harness would include the connectors for the 86-87:
Crank sensor, coolant temp sensor, coil pack, TPS, injector harness, plus provision for the IAT (2), and wires for FP and WB logging and extra MAP connector plus build in 40A HW with connector.
That would be a winner IMO.