austinibew145
Well-Known Member
- Joined
- Apr 7, 2008
what should the readings for a scanmaster be? and dose aneone know about winaldl?
2 questions
- Thread starter austinibew145
- Start date
austinibew145
Well-Known Member
- Joined
- Apr 7, 2008
DailyDrifter
The Slow and the Curious
- Joined
- Dec 5, 2007
You will have better response if you post your readings here. I have no clue about the WINADLD.
toecutter_tx
New Member
- Joined
- Mar 26, 2008
Winaldl works you just need to buy or make the correct cable.
Its very basic and has a slow data rate so dont expect more than 7 or so frames during a pass. Its no repacment for a scanmaster as looking at the logs to find why your engine blew will not be fun.
Its very basic and has a slow data rate so dont expect more than 7 or so frames during a pass. Its no repacment for a scanmaster as looking at the logs to find why your engine blew will not be fun.
austinibew145
Well-Known Member
- Joined
- Apr 7, 2008
i have a cable from turbo link, the turbo link program dostnt seem to work. it is verson 1.0 or 2.0. will that cable work? with the scan master what should I look for? I rember bl 128 iac around 50 mal 31.
On the scanmaster blm's should be 128 + or - 10 is acceptable range. Most cars warm, IAC typically ranges between 10-30. With a malfunction code 31, is your wastegate solenoid connected?
