120lb injectors and dual M15 nozzles

[novi2000]

I am running E85 and would like to know if 120lb injectors and dual M15 nozzles on the alky control kit is the equivalent volume of running 160lb injectors?


Thx

 

[novi2000]

Any thoughts?

 

[jasjamz]

I would start with one m15 nozzle and tune for no knock. When you turn the controller up to 8 and are still see real knock in high gear but have your A/F in the range you want it add an m10. Turn the controller back to 6 and see if you can tune more power out of it.

 

[Razor]

I am running E85 and would like to know if 120lb injectors and dual M15 nozzles on the alky control kit is the equivalent volume of running 160lb injectors?


Thx

Guess we need to run some math.

At what pressure do you run the 120's to flow 120? 45 PSI?

The twin 15's at full pump output should be at 150 PSI pressure. Then subtract boost level from that number. So 20 PSi is 130 PSI effective. The 15 GPH nozzle is rated at 100 PSI.

 

[novi2000]

Thx for the replies.