Search results

Has anyone done the swapover to a rack setup from the box setup.Looking for details. Also anyone ever cut the front crossmember and installed a tube instead.Looking to get rid of some weight. I posted here because I believe some stage 2 cars have these mods done. Thanks again Tony

I`m looking for a converter company in conn.The persons name was Danny.The box says P-T-C or any order of letters. The company was in willmanac,ct.(Spelling) Thank you Tony

How much rpm drop is there when shifting.What is the avaerage drop.This would be on a mid 8sec car.I beleive my converter is not locking up due to only 300-400 rpm drop on a powerglide setup. Tony

I`m looking to run 30psi.My timing is at 24 and i`m running 22 psi. My a/f is 11.2.Should I drop the a/f to 10.5 and timing down to 20? This is on a twinturbo car Tony

Can I gain hp by going from a 3inch downpipes to 3.5inch downpipes on my twinturbo car. Tony

At the buick performance weekend at etown my trans died. Alot of crunching noises.Who builds a good glide for a mid8 sec gn. If anybody went to the etown event I was the blue tubbed GN. Tony

What kind of timing to run on a stage 2 twinturbo.I am running 23 deg rite now at 22psi.The car went 8.51@158.I would like to run in the area of 28-30 psi.The a/f ratio is between 11.0-11.2. Thanks again Tony

A while back I asked a question about gearing.After reading all the info people put on the question I installed a set of 4.56 gears before I had the 3.90. But before that I went to the track again to get the last feedback that I could.The results were 8.86@154mph @25psi. The 60ft was a...

What gear are people running with a glide trans.I`m runnig a glide with a set of 33x16.5 tire and a set of 3.90 gear.The car feels lazy comming out and from the data logs it take a little time to get the rpm up after launch.The car weighs in at 3020 with driver and is twin turbo. Tony

Where can i get to see if speedpro has a unit for a import car.The car has a cam sensor and a crank sensor,one coil that control the spark to 4 cylinders. Tony

Hi everyone.I`m running one of PTE`s big solid roller cams on my stage 2. I lost the cam card to this cam but found an old cam card and it says .020 intake/.022 exhaust.It`s one of there race cams. Can I use the .020/.022 lash and be okay. Tony

I want to make a launch contol to control boost on the line with the t-brake.I`m going to use the MSD for the 2step but need to control boost.Can I mount a racegate on the uppipe to the throttlebody and use a solinoid and a regulator to set it. Has anyone ever tryied it. Tony

Would I be able to run a 16v system in my car.Would the fast system be okay with the extra voltage.I know Craig talked about the 16v system and the data logger issue. Tony

I run a Twin Turbo car with 2 T70 turbos.This all started in the spring as a mild popping under boost and high(6k rpm and higher) rpm.As time progressed it was getting worse.The only way to get rid of the popping was to turn the boost down to 16-17 psi. Changed wires,coil pack,module,still...

I run a speedpro with a set of 160lbs injectors.A freind of mine suggested that I change the injector size on the felpro to 120lbs. Is there a performance stand point or just to control the injectors with a high duty cycle. Tony

Here is what I am experiencing. When staging the car on the brake with my foot to the floor the boost will slowly build and stop at 18-19psi then when I let the brake go it take less than 2 seconds to come to full boost which is set to 25.I am leaning toward a very tight converter. When i...

Has anyone had a turbo that the tips on the exhaust wheels show damage like melted or just breaking off. Tony

I have a twin turbo car and my question is can I run my turbo oil drains into the dry sump pump.Will there be a problem with oil starvation due to the sucking of the pump. Tony

When running a twin turbo car.Can you run the drains from the turbos to the dry sump pump or will the pump suck to much oil from the turbo. Tony.