Search results

Anyone have any pump thrust washers they don't need they'd be willing to sell ? I've called everyplace I know locally and they don't have what I need. Transtar, rebuilders, PATC, etc I have a #5 Light Blue .193 in there but I'm @ .033 final end play and it's not thick enough. Video says .004 -...

When you're all said and done, should the output shaft turn with the same pressure in both directions ?? Presently my output shaft has a yoke on it. Counterclockwise it turns with medium resistance. Clockwise it turns, but with ALOT of resistance that I need 2 hands to turn it. Is this...

Disregard

For starters, I'm rebuilt up to the point where I put the overrun OD clutch together. This is where I'm at. Trans is built up to the center support standing vertically in a stand. I have the 4th gear piston loaded onto the Center support. It's a shaved piston that Jakeshoe hooked me up with...

I'm going to sell the 200-4R project I had going for my 1970 442 tribute. For those wondering why, I'm selling my Olds drivetrain for an LSX upgrade. So I have an upgraded 1982 Valve bodied 200-4R with 1. CK Performance billet forward input drum ($350) 2. CK Performance level 2 rebuild kit...

It's recommended to shave the OD clutch piston .080" to add a 3rd friction to it in applications over 300hp. (200-4R) I'm just curious how you guys that have rebuilt your transmissions have gone about doing it. I was told a lathe was a good way to do it, but I don't own one. I have a drill...

Anyone got any available cheap for the 200-4R or recommendations on what builders to call for USED one's? Just looking at cheap one's used in good condition. I'm not buying new unless there's nothing out there. :D Looking to save wherever I can now since this project has really gotten away...

What's the best snap ring pliers you guys have used?? I bought a set like this, and I'm not too thrilled with them. Each size (4) has 2 different styles, straight, and angled, with no spring assist. They just really suck on snap rings that don't have the pin holes, and have flat angled edges...

Quick question. I have some confusion on the proper steels for the Forward Drum and Direct Drum These are the only ones that are the same diameter, so I'm not sure what steels go with which drum. This is a picture I have of all the steels I have to choose from. I've already put together the...

Not sure if I'm missing this spring in my Valvebody. nut driver pointing at it This valvebody has a CH2 stamped on it in white ink. So it's not a BRF. My rebuild video DOES show this #315 SPRING, Throttle Valve Mode Dn Shift, but the BRF valve body exploded view says there is none...

Anyone have any Edelbrock Performer series TV brackets that need a new home ?? Looking to save where I can by cleaning out others garages first for my 200-4R. Also need a 10 Drive gear (Green?) and 28 Driven gear (Yellow?) if anyone has the used but good condition, GM # 8639906

Probably a dumb question, Can't seem to figure out how to pull out the driven gear. Trans is completely torn down to an empty case. There's a bolt with a flat bracket that presses up against where the speedo cable screws onto the trans, but no idea how to yank that assembly out. Gear in...

Got everything out of my 200-4R except the part that needs the special Low/Reverse clutch tool. The last part I got out was the sun gear shell and sun gear. Basically I'm at Row C all the way to the right of this diagram. http://www.bulkpart.com/Merchant2/graphics/Catalog-pdf/200-4R.pdf I have...

Hey gents, I joined because I know you guys are the experts with this trans. Looking to put one of these into my 1970 Olds 442 tribute behind my Rocket 350 with 425ft lbs. Primarily looking for a core in the Chicago area, N. Illinois, or S.Wisconsin or NW Indiana. Per Chris @ Ck Performance...