Search results

double

The trunk wiring harness has 3 different connections going to it. I have been troubleshooting some electrical issues and this is one I have a question about. Two of the connectors have multiple wires and the third has only one wire. I read to check this to make sure 1 of the 2 multiwire...

I have got a wastegate actuator but am having some problems getting it installed. The piece that the wastegate rod connects to is turn into the opposite position as it should be. Is there a way to remove this piece to change its position or how is this accomplished. There is only 45 degrees of...

Mmmm will take alot of work, but the above may be a bit much. I read an article awhile back about a guy who took a bone stock and with 600 or 800 was hitting high 12's. While it takes alot to get another second off, you can do it for less than 8g's. They are hitting 10's with hot air cars. That...

Thanks for the tips. I have notice a few things on the car so have ALOT of troubleshooting going on at the moment. I just sent the hotwire kit back to Caspers. They said they would inspect it and go from there. I am not getting a fuel reading when the car is running and I just replaced the...

yea from what I have read online I havnt seen anyone have any problems with these kits. Maybe I have a faulty kit or something. I will be calling Caspers on Monday. Hopefully them or someone will know what causing the problem. It can't be the modules because we tried 3 different modules and 2...

Well I got everything installed Caspers hotwire plug n play adapter and have tried 86/87 module and coils, 88 3 pack coils and module all with same result....only fires on two cylinders. Hook back up original module/coil fires on all 6. I gave up trying to get it to start and took it to a...

Have fuel going after changing fuel pump and filter but now it is back firing. I used a 3+2 coil firing order from here I believe but wanted to be sure.

the car came with the turbo 350 already in it. I will probably leave it in for the time being as there are more important issues on car to deal with first. I might have the other rebuilt so that I have a backup if anything goes wrong with this one.

I did the Caspers 102084 "Hotwire" kit on my 84 ttype. Though I won't have car running till at least this weekend so can't tell ya if good or how good yet. I am running a borg warner module with 3xMSD coils. Will let you know if all goes good this weekend.

Anyone have any experience or thoughts on this? I have orig tranny as well, but they guy I bought it from said the 350 was just rebuilt and the orig while would be ok, could probably use rebuilding. Being that he is a tran. mech. I decided to stay with the turbo 350. Sunday we are dropping fuel...

summit racing mainly now, how are the last ones truck wheels? Because they are not D holes? Not every car wheel is a D hole rim.

i couldnt do the nascar stuff or wheel lol not that big of fan lol found these doesn't look bad

I do know that the column closest to dash does move alot. The car also has the floor shifter so I can see how could be either one. I will play with it tomorrow and see what I can find out.

hmm how bout these

I have a 1984 T-Type I just bought and we have run into a bit of a problem. The car had a bad ignition module in it so I have upgraded the module with caspers hotwire kit and added new coils. The problem is when you try to start the car, the key wont turn far enough to engage the starter. It...

Opinions on wheels for my 84 T-type my wheel search post

In short, I have about $500 to spend on the wheels. So my choices are limited to that price range. Second my car is white and I don't like like chrome much. So I want at least the center portion of wheel to be black. I also like deep set wheels. I have found a couple of wheels well within that...

I just bought an all original 1984 T-type. It has been sitting under a carport for years and heard some guys talking about it so went and looked at it one day. I started researching it thought this would be a really nice piece of American muscle car history to own and I was already in the market...

looks like just two bolts missing nothing attached to that still dont know why the two middle hoses were plugged.