Recent content by PsYcHo GN

I got your PM, but it will not let me open it. I received an email notification, but I can't respond to the notification. PM me your phone number and I'll give you a call.

I sold my GN and I have about 3 gallons of Methanol from SoCal Performance. I need to use my fuel jug so I need to get rid of it. If you bring your own fuel jug, you can have it. I'm located in Gardena.

I sold my GN a while back and I have 2 rear Weld wheels that were going to be used for the track. They have been sitting in my shed for a couple of years. 15x8" 3.5" BS $100 for both. Located in Gardena. I also have a factory intercooler. $80 Email me if interested. sbsurfer777@gmail.com

Did you have to re-tune your car with an emissions chip? What do I need to put back on the vehicle for it to pass visually?

I don't have any of the stock stuff. The car has a TT alcohol chip in it (see sig.), will that have an affect? I have the stock chip, but the car has mototron injectors, not sure if that matters. Do I have to remove the adjustable FPR?

I haven't posted on this board for a long, long time (just been lurking when I have time). Been really busy with work and my daughter. Anyway, it's been two years since I purchased my GN. It's smog check time. With the modifications these cars have, will they pass a smog exam? The car has...

One of my original front bumper fillers cracked, probably due to age. Since I need to replace it, would I be better off buying ABS plastic or fiberglass bumper fillers to replace them? Which ones line up correctly with the body lines? Is one better than the other?

B U M P ! ! ! I've had many inquiries, but not takers yet. Please note: Shipping charges for a set of wheels and tires are $200, that is why I prefer somebody local to purchase them.

The wheels are currently off the vehicle since they are for sale. I don't plan on putting them on to take a picture. If you look point-blank range through the mesh of the wheels, you can see the adapters if you know the car is running adapters. Most people don't know what they're looking at so...

Thanks for the compliment! I've had a few interested parties, but I still haven't seen any cash!

I'm not sure what the exact backspacing is since they're a custom fit. I haven't measured the wheels with the adapters in it. The adapter sizes are 1" and 1.6" (i'm guessamating since they are in the garage and I'm inside the house). The adapters were made by Motorsport Technology.

I've decided to sell my custom fit wheels and tires off my GN. The wheels are Axis Penta with custom built hub centric Billet adapters, which took a couple of weeks to have built. The offset is right on the money for Turbo Buicks, Regals, and Monte Carlos. The wheels are 19x8.5 (front) and...

I run wheel adapters on my GN with my 19" wheels. Never had no problems. I abuse the car and no problems. I wouldn't go with those cheapy adapters. I would be afraid I would lose a wheel. You need to go with newer technology. I had mine custom made through Motorsport-Technology. They're hub...

It sounds to me like some people have more money than common sense.

Thanks for the info guys! I'll do a compression test first and see what I find. If it tests fine, then I'll plan to do a leak down test in the near future. If it doesn't test fine, then I'll have to replace the headgasket(s) before something worse happens.