iac readings are good...and my tps. is holding around .35-.48 at idle since the last time i adjusted it....but my WOT readings are super low around 2.50 at the most. Even when loose during adjustment, when i move it WOT will hit 2.50 and if i move it a little more it will zero out.....??? is...
I noticed the other day.. my car had a stumble in the idle every now and then..so checked my scanmaster, and my tps readings were off.(.30)....so i re-adjusted it to (.43), a few days later..what do ya know off again. This time (.50)....and my full throttle will not go over 2.60 volts....Could...
parts list i'm looking for:
TA33c modified stock hot air turbo
2.5 downpipe
ATR or Poston 84-85 headers
modified turbomotion V2 V3 hot air intake
a decent set of gta wheels
I am currently having a 2nd to 3rd gear shift problem...so i'm going to drop the valve body to clean and de-burr 2nd to 3rd gear throttle valve. But while i have it apart, i was thinking of installing the (art carr) kit. On the art carr website, it says this kit is for non-lock up.....Will this...
i am having this same issue...nice snappy shift 1st-2nd....then 2nd revs out to like 4k and shifts hard.....what are my options?..drop the pan and valve body, and what section should i look for to clean and inspect?